All Categories


US$
    0

    Cart

    Loadding...
    Home>Car alarm /OBD diagnostic tools>Anti-theft device>For Cars>Universal 12V keyless car alarm system with remote central locking and keyless entry
    Universal 12V keyless car alarm system with remote central locking and keyless entry

    Universal 12V keyless car alarm system with remote central locking and keyless entryItem NO.: FDQ-QC007

    US$ 10.00
    Quantity
    Adding to cart succeed
    Universal 12V keyless car alarm system with remote central locking and keyless entry
    color:red,size:xxl
    Subtotal: US$ 0
    View My Cart

    Copy and share this link on social network or send it to your friends

    Copy
    • I. Function Introduction

      1. Remote Locking
      Press the "lock" button on the remote control, the turn signals will flash once, the horn will sound once, the doors will lock, and a window closing signal will be output, enabling the window closing function when used with a window closing module.

      2. Remote Unlocking
      Press the "unlock" button on the remote control, the turn signals will flash twice, the horn will sound twice, and the doors will unlock.

      3. Remote Trunk Opening
      Press and hold the "trunk open" button on the remote control for 2 seconds, the turn signals will flash three times, the horn will sound three times, and the trunk will open. If the remote control has four buttons, pressing and holding either the 3rd or 4th button will open the trunk.

      Pressing and holding the "trunk open" button on the remote control for 2 seconds will also open the trunk.

      4. Electric Lock Selection

      The system can be configured for electric or pneumatic locks via a jumper on the main board. The factory default is electric locks.

      5. Remote Control Pairing

      If the remote control is damaged or lost, you can pair a new remote control by pressing and holding the learning switch on the main unit for 3 seconds. The turn signals will light up. Press any button on the new remote control, and the main unit's turn signals will flash once to indicate successful pairing. Up to three remote controls can be paired at once. Both the old and new remote controls must be paired together; otherwise, the old remote control will become inoperable.

      6. Remote Vehicle Location

      Press the third or fourth button on the remote control once, the turn signals will flash three times, and the horn will sound three times, enabling the sound and light vehicle location function.

      II. Electrical Parameters

      1. Main Unit Receiving Frequency: 433.9MHz

      Input Voltage: DC12V

      Static Current: Less than 10mA

      2. Remote Control Frequency: 433.9MHz

      Input Voltage: 6V

      Battery Model: CR2016

      Encoding Method: Learning Code

      III. Product Wiring Diagram